Search Results for: coast guard p6 pump specs
High Volume, Direct Drive, Engine Mounted – Choice of the U.S. Coast Guard
Choice of the U.S. Coast Guard
- Medium Pressure
- High Volume
- Direct Drive
- Engine Mounted
This model provides a “self-contained” gasoline-powered “slide-in” type Compressed Air Foam System (CAFS). The CAFS is designed to fit into the back of a standard length and width pick-up truck or fire service body.
The CAFS is designed to discharge water only, air only, foam solution only, or compressed air foam from the same discharge outlet. In addition, the consistency of the compressed air foam (expansion ratio), wet/dry, is fully adjustable.
The UHP-HV® (Ultra High Pressure-High Volume) module offers the best of both worlds for the wildland-urban interface. Darley has combined our versatile direct-drive 2BE pump and the CAT 7CP high-pressure piston pump to meet all your firefighting needs in one compact package. The main pump can be used for water transfer or for 1-1/2” hose for structural attacks, while the belt-driven CAT can produce low flow high pressure flows in excess of 1300 psi with optional foam through the 1/2” HP hose.
Class “A” Foam Proportioner. The Fast Foam system offers a reliable, accurate, compact foam proportioning system at an economical price. This model treats up to 50 gpm @ 1% at pressures up to 175 psi.
The motor is a 12 VDC, 1/2 hp continuous speed electric motor. The pump is a continuous-duty, piston-type, positive displacement pump. The pump is rated at 1.5 gpm. The pump shall be supplied with a 250 psi (17.2 b) safety relief valve for protection against over-pressurization. The Venturi will flow up to 150 gpm.
Class “A” Foam Proportioner. The Fast Foam system offers a reliable, accurate, compact foam proportioning system at an economical price. This model treats up to 250 gpm @ 1% at pressures up to 175 psi.
The Darley Foam Refill System is designed to create a safe alternative to refilling your Class A foam tank without the need to climb on top of your truck. The Foam Refill System kit includes all the necessary equipment needed for a simple installation into new or existing apparatus. Once installed, simply attach the pickup hose, insert the tube into the foam pail, hold the switch to on, and fill your foam tank from a safe position until the green foam full light appears on.
This system is offered in two different ways. The panel-mounted kit and the self-contained kit. The panel-mounted kit will come with all the necessary components needed for a simple install. The control panel will be separate from the pump, allowing you to remote mount parts as needed to fit into tighter spaces.
The self-contained kit will include all the same parts as the panel-mounted kit but will be fully assembled with an aluminum bracket to minimize assembly/installation for the end user.
The ATP FOAM FLURRY™ is our most economical proportioner. It is simple to install and operate and works without 12v power – no amperage issues for small pumps. For your next Darley portable pump purchase or retrofitting your current pump, the ATP FOAM FLURRY™ will deliver foam cost-effectively.
- All brass construction – no plastic
- Fast adjusting variable control ball valve
- Capable of .5% injection rate up to 130 gpm